Delivery to Ireland

This question was asked by – Customer – AF I’m wishing to purchase 2 x 25litres high solids sealer to be deliverd to Galway in Ireland, please could you advise me of the cost? Good Morning, Thank you for your enquiry, I can confirm we do ship to Ireland for £20.65 per drum Kind regards Jenni @ Adseal Jenni...

imprinted concrete

This question was asked by – toby graham Hello, I have an imprinted concrete driveway in terracotta. Is it possible to change the colour with one of your stain products Yes it is totally possible to change the colour of your concrete. You would first need to remove the old sealer using the Stripping solution (link below), then apply the Solid colour stain. If you want to just have it one colour then you can finish here by applying a sealer over the top. If you are looking to give it the 2 tone look then Imprint should have you can apply a diluted coat of the smartcolour (a darker colour), allow to dry and then seal. https://www.adsealcolours.co.uk/Solvent-Stripper-SolStrip.html https://www.adsealcolours.co.uk/Solid-Colour-Stain.html https://www.adsealcolours.co.uk/Smart-Colour-Stain.html Drew...

Advice on sealant

This question was asked by – Lee I’ve up-cycled the slate bedding from a snooker table, by using it as a a work top for a BBQ I built in the garden. I was really pleased with my idea when I first installed it. But it’s been a few years now and it’s looking a bit shabby, it’s gone grey and had moss forming on it. So I have sanded it down and got rid of all the moss, but I want it to be glossy like when it was first installed. Is there a product that would restore it to its shinny former state. It looks great in the rain, but when it dries it returns to a dull grey finish. As you are looking for a glossy finish, I would recommend using the High gloss PU (link below) this will give you a good glossy finish (like when it is wet) and it is a very hard wearing resin so it will last many, many years before it would need re coating. https://www.advancedsealingsolutions.co.uk/High-Gloss-PU.html Drew...

Tarmac Driveway

This question was asked by – Dennis I.Leeds My driveway is rather mossy and porous and 30Sq M. What quantity and type of restorer do I require,please? You will need to jet wash off all the moss, then once it is clean and dry you can use the Tarmac restorer (link below). https://www.advancedsealingsolutions.co.uk/Tarmac-Restorer.html Drew...

STAINING A WALL

This question was asked by – Proinsias Hello. I have put an inch thick cement coat on top of a block wall and have carved out the cement to imitate real stone shapes. I would like to add a realistic mottled stone finish to imitate grey limestone or slate. Can I apply your product by hand-brush? Would your translucent range be suitable/ Newlook do a specific stain for vertical surfaces called Wallstain (link below), if you use 3 or 4 different colours you can achieve a very nice natural looking wall. https://www.adsealcolours.co.uk/WallStain-Solid-and-Translucent.html Drew...