high gloss sealer for travertine

This question was asked by – Keith Askham can I use this product effectively in a shower area I have Travertine tiles in my own bathroom, I sealed it with the High gloss PU about 4 years ago and it still looks good as new. The only thing I will say is you need to let the sealer cure for a at least 48 hours before using the area. High Gloss PU (HGPU) Drew...

Slate sealer

This question was asked by – Kevin Banks-Dunnell I want to seal my outside slate patio with a heavy duty high gloss sealer, which product would you recommend please? You have a couple of options (links below) the Heavy duty sealer is the cheaper of the two and is easier to use but wont last as long, whereas the High gloss PU will last longer but you have to make sure that the paving is 100% dry and that you will have at least 5-6 hours of dry weather once it has been applied. Heavy Duty Sealer (HD) High Gloss PU (HGPU) Drew...

protecting stone from lichen and algae with sealer

This question was asked by – marcus I have a terrace of indian sandstone which has developed terrible black spot lichen everywhere. I have pressure hosed off as much as possible but cant get it all off. If I could keep it like it is that would be ok even tho some spots remain. Would your Stone and Slate Protector prevent the regrowth of the lichens and algae. Yes applying sealer to the surface will stop the algae and lichen from being able to take hols on the paving (it my form on the surface but it will be easy to wash off/treat), if the algae does come back (if there are a lot of trees in you area) it can be treated with our moss and algae remover which you just spray on to the paving and leave to do its thing. Stone & Slate Protector (SSP) Moss & Algae Remover (MOSS) Drew...

Protecting Welsh Slate Flooring

This question was asked by – Jared F I have a welsh slate floor that was put down 5 years ago in a kitchen. It needs re-protecting as the original stuff I applied has now rubbed off and some small areas now have the bare stone showing (places where chair legs have rubbed etc). What’s your advice for this in terms of products you suggest and the method of application? I would suggest using the High gloss PU, this is a very hardwearing sealer, but I would suggest removing the old sealer first as it is obviously having issues with adhesion. Application instructions will be sent with the product. High Gloss PU (HGPU) Drew...

Natural slate sealer for outdoor use

This question was asked by – Paul M My back door step is done with natural slate. I want to give it a wet look effect but I am finding it extremly difficult to get a slate sealer for outdoor. What product do you recommend? The best on to use on slate will be the High gloss PU sealer, High Gloss PU (HGPU) Drew...